2025 Schaffer 8620T

40km/hr with ECO mode, boom suspension with on/off switch, extra 325 counter weight, flat face couplers at auxiliary, pressure release at auxiliary to make hose hookup and disconnections effortless, 150 L/min oil flow with flow sharing hydraulics, reversing fan, dynamic load moment controll automatic grease system by SKF, AC, Radio and Grammer air suspension seat. Also ALO/Quicke available. New grapple bucket available too.

Standard equipment telescopic wheel loader 8620 t-3

• 4-cylinder diesel engine Deutz TCD 3.6, 75 kW (102 HP) / 95 kW (129 HP)
• DOC, DPF and SCR for compliance with Stage V emissions standards
• ECO Mode
• Combined oil cooler with hydraulic fan drive
• 2-stage air cleaner with highly efficient pre-cleaner system
• Hydrostatic four wheel drive with automotive control
• High-pressure drive HD-plus
• Tyres 18-22.5 MP590, offset -50
• HTF (High Traction Force), SPT (Schäffer Power Transmission)
• Planetary axles HD with limited slip differentials, 8 hole
• Multiple disk brake, maintenance free; service and parking brake
• Maintenance free articulation joint, 2 steering cylinders, rear pendulum axle

• Z-bar boom with parallel lift
• Ferro-form sliding elements in the telescopic arm
• Headstock type wheel loader with hydraulic tool lock
• Comfort Cab PLUS
• 10" touch screen, mobile phone holder
• Radio preparation
• Electronic SRS joystick (aggressive, smooth)
• Selectable user profiles of the working hydraulics (fast, medium, slow)
• Steering column adjustable in height and tilt by foot pedal
• LED working headlights: 2 x front, 1 x rear
• Lighting system without ABE (General approval certificate) according to ordinance StVZO
• Sockets: USB-A and USB-C, 3-pin Euro, 12 V vehicle

• Soft touch operating station for working lights and windscreen wipers
• Rear window heater
• Wide-angle and close-up mirrors
• Working hydraulics standard / options: 106 / 125 (stronger pump) / 172 l/min (Load Sensing)
• Dynamic load moment control according to DIN EN474-3
• Additional control unit can be operated electropropotionally using the joystick
• Electric locking latch for additional control unit on both sides
• Switchable end-position cushioning of the cylinders (stroke, tool, tele)
• Electric pressure relief of hydraulic couplings (on the steering tower and telescopic arm)
• Depressurised return

Technical data telescopic wheel loader 8620 t-3

• Engine
  • Type: 4-cylinder diesel engine Deutz TCD 3.6
  • Output: 75 kW (102 HP) / 95 kW (129 HP)
  • Exhaust gas treatment / emission level: DOC, DPF, SCR / V
• Tyres
  • Standard tyres: 18-22.5 MP590, ET-50
  • Option I: 400/70-20 AS
  • Option II: 500/60-22.5 AS, ET-50 installed on this machine
  • Option III: 600/40-22.5 AS, ET-50
• Electric system
  • Operating voltage: 12 V
• Drive
  • Traction hydraulics: Hydrostatic-automotive
  • Axles: Dana HD axles, 8-hole rim; planetary final drive and automatic slip-control differential, swing axle at rear
  • Speed / option: 0 - 20 kph in 2 gears switchable under load / 0 - 40 kph this machine 40K
• Brakes and steering
  • Service braking system: Combined brake hydrostatic and multi-disc brake
  • Parking brake: Multi-disc brake running in oil bath
  • Steering: Fully hydraulic articulated steering
• Tank capacity
  • Fuel: 150 l
  • Hydraulic oil: 130 l
• Working hydraulics
  • Delivery rate: from 106 l/min
  • Operat. pressure: 220 bar
• Weights
  • Operating weight cabin incl. Original tyres, driver and standard bucket: 7,050 - 7,950 kg
  • Lifting capacity: 4,200 kg
  • Tipping load, straight, pallet fork acc. to ISO 8313: 5,480 kg
• Sounds and vibration
  • Sound pressure level LpA: 71 db(A)
  • Sound power level guaranteed LwA: 102 db(A)
  • Sound power level equivalent LwA: 101 db(A)
  • Hand/arm vibration acc. to ISO 8041: <2,5 m/s²
  • Total body vibration acc. to ISO 8041: <0,5 m/s²

• Dimensions see attached pictures
  • (A) Wheelbase: 2,535 mm
  • (B) Chassis length: 5,114 mm
  • (C) Overall length with standard bucket: 6,031 mm
  • (D) Digging depth: 75 mm
  • (E) Max. working height: 2,660 mm
  • (F) Swivelling point, telescopic arm retracted: 4,085 mm
  • (G) Loading height with pallet forks: 4,960 mm
  • (H) Max. dumping height: 4,350 mm
  • (I) Front end height: 1,910 mm
  • (J) Dumping width: 650 mm
  • (K) Seat height: 1,660 mm
  • (L) Cab height: 2,770 mm
  • (M) Max. bucket pivot point: 5,200 mm
  • (N) Overall width / option: 2,080 / 2,050 - 2,230 mm
  • (O) Inner turning radius: 2,310 mm
  • (P) Outer turning radius: 4,390 mm
  • (Q) Outer radius with standard bucket: 4,920 mm