New Inventory

Protect your soil and maximize your resources with the innovative tilling technology of Smart-Till. From soil management to pasture/hay management, Smart-Till's patented tines help optimize yield by fracturing rather...

Protect your soil and maximize your resources with the innovative tilling technology of Smart-Till. From soil management to pasture/hay management, Smart-Till's patented tines help optimize yield by fracturing rather...

Match tillage or planting equipment with adjustable frame width, 9' to 15' models and rigid frame on 3' to 6' and 16' models. Big Jim Packers are available in Red, Green and Blue frame colours. They a...

Flex Packers are available in a 3-section configuration for widths of 21' to 32' . Packers 33' to 50' are built on a 5-section frame. The balanced frame design minimizes tongue weight. Each wing gang is i...

The Athens Model 127 and 167 Offset Disk Harrows have the features, sizes, and weights to handle nearly any disking job on the farm. They can easily plow through stalks and stubble, prepare seedbeds, or incorporate chemi...

The Athens Model 127 and 167 Offset Disk Harrows have the features, sizes, and weights to handle nearly any disking job on the farm. They can easily plow through stalks and stubble, prepare seedbeds, or incorporate chemi...

A low cost way to push, level and firm smaller areas economically. Sizes from 11.5-20'; Transports 1 foot wider than working width. ...

30" Diameter x 3/8" Wall Drums; 3/8" Thick Inner End Plates; 1/2" Thick Outer End Plates; 2 7/16" Drum Shafts; 2 7/16" Greaseable Ductile Pillow Block Bearings; 6" x 6" x 1/4"...

30" Diameter x 3/8" Wall Drum; 1/4" Thick Inner End Plates; 3/8" Thick Outer End Plates; 1-3/4" Drum Shafts; 1-3/4" Greasable Bearings; 4" x 3" x 3/6" Wall Tongue' 4"...

30" x 3/8" Wall Roller Tube; 1/4" Thick Roller End Plates; 1-3/4" Roller Centre Shaft; 1-3/4" Greaseable Bearings; Ballast fill and vent plugs; 4" x 4" x 1/4" Wall Main Frame; 4&qu...

The 7' base unit offers, 6" tine centres, 15 tines and 2-3/4" sweeps. Extension kits are also offered by Big Jim. Contact us for more information. ...

Raised Height: 61'; Transport Height: 10' 1"; Axle Retracted Width: 168"; Axle Extended Width: 216"; Lowered Reach: 47' 8"; Raised Reach: 39' 8"; Tire Size: 11.5" L15...

Capacity: 38 Gallons; All our fertilizer spreaders are made of high-quality material. They are degreased, then painted with anti-rust and finally coated with anticorrosive paint dried at 120°C. Also suitable for spre...

Capacity: 52 Gallons; All our fertilizer spreaders are made of high-quality material. They are degreased, then painted with anti-rust and finally coated with anticorrosive paint dried at 120°C. Also suitable for spre...

Capacity: 66 Gallons; All our fertilizer spreaders are made of high-quality material. They are degreased, then painted with anti-rust and finally coated with anticorrosive paint dried at 120°C. Also suitable for spre...

Capacity: 79.5 Gallons; All our fertilizer spreaders are made of high-quality material. They are degreased, then painted with anti-rust and finally coated with anticorrosive paint dried at 120°C. Also suitable for sp...

Capacity: 89.5 Gallons; All our fertilizer spreaders are made of high-quality material. They are degreased, then painted with anti-rust and finally coated with anticorrosive paint dried at 120°C. Also suitable for sp...

Raised Height: 67' 1"; Transport Height: 11' 2"; Axle Retracted Width: 168"; Axle Extended Width: 216"; Lowered Reach: 57' 7"; Raised Reach: 45' 9"; Tire Size: 12.5" L15...

Available only in Quebec & Maritimes.The Dirt Boss is built for brutal use as a dirt dumper. The 1/4" steel floor and 3/16" thick sides are formed for strength. The hydraulic tailgate, which includes a gra...

Available only in Quebec & Maritimes. Mighty T1200H & T1200 Dumpers comes in two styles: High and Standard model. The High model is built it 54" sides with brackets for a 10" plank, and the standard mo...

A large variety of combine parts are offered by PolyTech industries, including but not limited to, Combine Skids, Auger Tube Liners, Auger Bed Liners, Auger Trough Liners, Moldboard Cover, Head Liners and Grain Tank Line...

HCC has the tools to help you get more from your combine reels. With HCC's combine reel enhancements—the Orbit™ Trac II Combine Reel, Flip Combine Reel Kit, and Paddle tine—you can improve performan...

The DM4 Disc Mower, with 4 discs  and 65-3/4" working width, suitable for small farms.   The DM5 with 5 discs, 80 3/4" working width has the peculiarity of 2 inner discs which turn to the same ...

The Sitrex Tedders are ideal machines to spread, air & turn all types of forage in any type of terrain.  Used for over 30 years on small & large farms.  http://www.sitrex.com/products.1.php  ...

The Sitrex 420/11 windrowing machine, was built using the most up-to-date design techniques. From this comes a fast, efficient, strong and extremely versatile machine, which gives excellent results in regard to both qual...

The Sitrex Sickle Bar Mower Series SB is a simple and reliable machine. Three working widths are available: 5' 6", 6' and 7' to satisfy the requirements of small and medium size farms. The mower is norma...

Kits are adaptable to fit all auger and conveyor types! Easy maneuvering around tight corners & turns; Aids grain bagger positioning, Auger-Steer also enables the auger spout to sway left and right making lining up e...

The new "V" type wheel rakes with 8, 10 or 12 wheels of the QR range give farmers the opportunity to use a machine featuring high performance in terms of both quality and quantity, combined with great simplici...

Rake with very sturdy equipment! Independent and interchangeable wheels mounted on roller bearings. Left and right SPREADING - TURNING and RAKING action, also suitable for limited space.    RP2 model = workin...

Sitrex Columbia Hay Rake is technically designed to provide a fast and careful raking, while it handles hay gentler than any other ordinary parallel bare rakes. Among its main features, along with gentle handling of hay...

The H/90  V-9-10-12 unit is very simple to use and gives excellent working results. The various adjustments allow correct wheels' pressure on terrain. The oscillation of the rakes' main arms and of the whee...

The Sitrex EXPLORER Pull-Type V-Rake is a medium size V-Rake. This machine is designed to obtain a maximum working width of 23' 3" and windrows widths adjustable from 3' to 5'. The drawbar and the openi...

Our Magnum line hay rakes rake up the crop quickly and gently, enabling better drying of the hay and an excellent yield. Elegantly designed, they are made of quality steel using advanced production processes and are fit...

The HDY Series Heavy Duty Rake has an extremely robust structure, as regards both the wings and the drawbar. All frame components have flexible couplings, allowing maximum machine adjustment for rough and difficult terra...

Available only in Quebec & Maritimes.This heavy-durty bale hauler, with a steel mesh or checker plate floor, is ready for long days of bringing bales in from the field. Standard widths are 8-1/2' or 9', but w...

Available only in Quebec & Maritimes. Eliminate tearing on your plastic wrapped bales! This bale wagon, designed for any size of round or big square bales, features a heavy-duty formed rub guard on sides. Widths are ...

Available only in Quebec & Maritimes. Optimized round bale hauler. Sizes: various lengths and widths available. Available only in Quebec & Maritimes. Optimized round bale hauler. Sizes: various lengths and widths...

Available only in Quebec & Maritimes. This tough round bale hauler is available in 20'  or 24' lengths. Heavy 5" x 3" HSS crossbars are curved for load stability. Main beams 8" x 4" H...

Available only in Quebec & Maritimes. The JBM Thrower Rack efficiently brings in your bales from the field. 72" side openings eliminate jams when starting to unload. Sizes: 8-1/2' x 20' or 8-1/2' x 2...

Available only in Quebec & Maritimes. Our compact bale wagon, with its 4' x 8' mesh floor, is the right match for your ATV or compact tractor. It hauls 2 round bales or 2 big square bales. Available only in Q...

Available only in Quebec & Maritimes. Simple and straight-forward, JBM Flat Racks are an efficient, easy-to-use bale hauler. Sizes: 8-1/2' wide by 16', 18', 20' or 24' lengths. Available only in Q...

Available only in Quebec & Maritimes. Cattleman's is the market-leading feeder of choice for North American cattle. Available in 7' and 8' widths and lengths of 12' (28 feeding spaces), 16' (34 fe...

Available only in Quebec & Maritimes. Available in 7' and 8' widths and lengths of 12' (28 feeding spaces), 16' (34 feeding spaces), 20' (40 feeding spaces), and 24' (46 feeding spaces). Avail...

Available only in Quebec & Maritimes. Our Deluxe Feeder Wagon's centre "v" ensures easy flow for any size of cattle, and is equipped with removable panels and optional chain sling for feeding round or b...

Available only in Quebec & Maritimes. The Econo Zero Grazer brings the advantage of the "V" floor and easy feed flow, but is built with a focus on economy. Lengths: 12', 16', 20' and 24'. Av...

Available only in Quebec & Maritimes. The TMR Feeder Wagon is perfect for feeding TMR and other feeds. Lengths: 12', 16', 20' and 24'. Available only in Quebec & Maritimes. The TMR Feeder Wagon is...

Available only in Quebec & Maritimes. The Self-Locking Feeders work great for vaccinations, artificial insemination and ear-tagging, with the feeder wagon making catching cattle in the field easy. A centre work platf...

Available only in Quebec & Maritimes. Tombstone Feeders are designed with horses in mind, protecting manes and eliminating bumps and bruises. Double bars keep hay wastage to a minimum.  Available only in Quebec ...

Available only in Quebec & Maritimes. This proven feeder sells itself! The double bar feeder is especially designed for dry and haylage bales, square or round. Widths: 7' & 8'; Lengths: 8', 12', 1...

Available only in Quebec & Maritimes. The Big Ben Feeder is field-proven for horses, and feed large round or square bales. Width: 8'; Lengths: 8' and 12'. Available only in Quebec & Maritimes. The Big...

Available only in Quebec & Maritimes. JBM's Heavy-duty Rectangular Skid Feeder, mig-welded for additional strength, keeps your hay up off the ground. Widths: 5', 6' or 7'; Lengths: 8', 12', 16...

Available only in Quebec & Maritimes. JBM's Heavy-duty Bunk Feeder is a walk-in feeder for hay, grain and silage. Widths: 4', 5' or 6'; Lengths: 10', 12', 16' 20' and 24'. Custom s...

Available only in Quebec & Maritimes. The Portable Bunk Feeders feed hay, grain and silage. The rear door provides access and easy clean-out. Widths: 5' or 6'; Lengths: 12', 16', 20' or 24'. A...

Available only in Quebec & Maritimes. The Fence Line Bunk Feeder is built for your barn yard or fence line feeding. Width: 34" standard or custom widths; Lengths: 8', 10', 12' 16' 20' or 24&#...

Available only in Quebec & Maritimes. Heavy-duty Tub Feeders are multi-purpose feeders. Widths: 34" or 48"; Lengths: 8', 10', 12', 16', 20' and 24'.Available only in Quebec & Mar...

Automatic's trailer Hammer Mill offers large capacity, durability and versatility that are unparalleled in the market today. Twin hammer mills, each with 66 alloy steel hammers to choose from auger or blower discharg...

Economical and versatile, this low profile electric mill is the ideal all-purpose machine. It's low enough to mount under discharge outlets of storage structures. Add to its versatility by adding options. A variety o...

Ferri Slope Mowers are designed to keep your tractor on level ground while you mow slopes. You can mow in-line; offset to the right; vertincal for mowing a hedge; and on a slope. The ZME Series is for small HP tractors. ...

Ferri Slope Mowers are designed to keep your tractor on level ground while you mow slopes. You can mow in-line; offset to the right; vertincal for mowing a hedge; and on a slope. The ZME Series is for small HP tractors. ...

Ferri Slope Mowers are designed to keep your tractor on level ground while you mow slopes. You can mow in-line; offset to the right; vertincal for mowing a hedge; and on a slope. The ZME Series is for small HP tractors. ...