Stock # 903

Call for Price

Get a Quote Get Financed Value a Trade Contact Us Book a Demo Get Directions Get Directions Print

Tines to match most any reel on the market and deliver more grain to the combine!

HCC has a variety of tines that will replace most worn out components to make sure you get the most out of your harvest.

Polytine Reels have a teardrop shaped metal bat with notches spaced 4-1/2" (114 mm) apart. The tines fit into notches and are fastened to the back of the metal bat approximately 3" (76 mm) above the notch.

The Love Reel has a sheet metal bat, and the tine fastens over the bottom edge. There is a projection that fits into a hole on the front of the bat approximately 2-1/2" (64 mm) above the edge.

ML Reels have a 1-3/8" (35 mm) tube with 3/8" (10 mm) round holes spaced approximately 4-1/2" (114 mm) apart. The tines have a round nub that fits into a round hole in the tube.

Level II Reels have a 1-3/8" (35 mm) tube with 1/2" (12.7 mm) hex holes spaced 6" (152 mm) apart. The tines have a hex nub that fits into a hex hole in the tube.

Wood Bat Reels have a wood bat with steel tines spaced approximately 4-1/2" (114 mm) apart. The tines are pressed into the bat, and there is a metal clip riveted to the bat to provide support to the tine.

Specifications

Model

HCC Standard Reel Tines

Category Name

Harvesting

Year

2021

Sale Type

New

Manufacturer

HCC