HLA Attachments

       Heavy Duty Stone Fork & Regular Utility Grapple   Same great features as regular & heavy duty stone forks  Opens up to 70"  Comes with 2-½" x 8...

       Manure Fork & Regular Utility Grapple   Opens up to 70"  Comes with 2-½"x 8" cylinders           ...

      Manure Fork (Cranked Kverneland Tine)   LDFE 32” Conus I cranked Kverneland tines (28” useable length)  MFE 35" Conus I cranked Kverneland tines (31" us...

      Pallet Fork Tine Extensions (Nursery)   Fits HD42 & HD55 forks  Optional tine extensions with angled pad for gentle clamping of root balls etc.  NOTE: Tine extensions red...

       Pallet Fork Tine Extensions (Standard)   Fits HD42 & HD55 forks  NOTE: Tine extensions reduce the capacity of your pallet fork.           ...

       Power Tilting Pallet Fork   Rotation is powered by a cylinder for smooth operation  Adjustable tines  Levels 45 degrees each way  Great for uneven job sites  ...

      Power Tine Pallet Fork   Hydraulic sliding tines  Ideal for clamping (such as a root ball in nurseries etc.)  Hyd. powered tines move in and out equally      &...

         Regular Duty Stone Fork & Regular Utility Grapple   Same great features as regular & heavy duty stone forks  Opens up to 70"  Comes with 2-½&...

         Rotating Pallet Fork   Rotation is powered by a cylinder for smooth and contoured operation  Adjustable tines  Rotates 180° for a full dump to the left ...

        Side Shift Pallet Fork   Hydraulic carriage side shift  16" travel (8" right or left)  Adjustable tines           ...

      Stone Fork (Cranked Kverneland Tine)   39" Conus II cranked Kverneland tines (32" useable length)  Tines installed on 4" centres  Ruggedly built  Heavy du...

       Stone Fork (Landscape with Power Rake)   ¾" shaft diameter  1-¾" spacing between tines  Points are ½" thick, 400 Brinell high streng...

     Stone Fork (Retainer Style Tine) - HEAVY DUTY   HEAVY DUTY  1-¾" shaft diameter  2-¾" spacing between tines  Points are ¾" thick, 400 ...

   Stone Fork (Retainer Style Tine) COMPACT DUTY   1" Shaft diameter  2-½" spacing between tines  Points are ⅝" thick, 400 Brinell high strength steel  23&q...

   Stone Fork (Retainer Style Tine) REGULAR DUTY   REGULAR DUTY  1-¼" shaft diameter  2-½" spacing between tines  Points are 5/8" thick, 400 Brinell hi...

  Stone Fork (Retainer Style Tine) with Split Grapple - HEAVY DUTY   HEAVY DUTY - UP TO 9500 LB CAPACITY  Two independent grapples  Ideal for brush & rock clean up  Ideal for awkwar...

 Stone Fork (Retainer Style Tine) with Split Grapple - REGULAR DUTY   REGULAR DUTY - UP TO 5500 LB CAPACITY  Two independent grapples  Ideal for brush & rock clean up  Ideal for awk...

  Compact Brush Grapple w/ Electric Actuator   Opens to 38" wide from ground to point of grapple  Tine tips and grapple tips are AR400 material  Tine spacing 6" on center  Sin...

 Round Bale Grapple (BG4000)   Designed for gentle handling of heavy wrapped silage bales  Lockable arms, one arm can be locked in a fixed position using pins so that all movement occurs in the o...

Square Bale Grapple (BG6000)   Same specs and design as round bale grapple with arms to accept square bales 4 - 6 ft long and round bales 5-6 ft diameter  Opens up to 84"  Approximate weight...

Square Bale Squeeze (BG7000)   86" extended – 30" Retracted  Arms are 50” long, 20” tall  2-½" x 28" stroke cylinder  Slim brace arm design allow...

Compact Utility Grapple   To be fitted on models SBC, MBC & LDFE  Heavy duty welded cylinder  Opens up to 37-½"           ...

Regular Utility Grapple   Can be fitted to models SB, SBHV, MB, MBHV, MFE, & SFR  Accommodates 4ft round bales  Works equally well on other materials such as manure, etc.  Opens up to 70...

Large Utility Grapple   Can be fitted to models SB, SBHV, MB, MBHV, MBHVX, & THMB (Does not fit THMBHV & THMBHVX buckets)  Specific heavy duty design for handling large round and square bales&...

Extra Large Utility Grapple   Can be fitted to THMBHV & THMBHVX buckets  Specific heavy duty design for handling large round and square bales  Opens up to 72”  Removable / bolt-on ...

Single Arm Log Grapple   Removable log grapple for pallet forks  Clamps onto Class II or III fork frame (walk through guards only)  C/w Hydraulic cylinder           ...

Log Grapple   Grapple version of HD55/HD75 pallet fork  42" solid fork lift tines  5500/7500 lbs capacity  C/w HD Cylinders           ...

Debris Grapple Fork   Two independent grapples  Replaceable tempered tines eliminate the need for a support bar at points which reduces lodging and jamming when emptying bucket  Designed to pick-...

Manure Fork with Cranked Kverneland Tine & Skidsteer Grapple   Designed for use on skidsteers with limited clearance for grapple arms  Comes with 2-1/2" x 8" cylinders     ...

Regular Duty Stone Fork with Retainer Style Tine & Skidsteer Grapple   Designed for use on skidsteers with limited clearance for grapple arms  Same great features as regular & heavy duty stone...

Low Profile Skidsteer Bucket & Skidsteer Grapple   Designed for use on skidsteers with limited clearance for grapple arms  Comes with 2-1/2" x 8" cylinders        &nb...

Standard Skidsteer Bucket & Skidsteer Grapple   Designed for use on skidsteers with limited clearance for grapple arms  Comes with 2-1/2" x 8" cylinders         ...

Scrap Grapple Bucket (Skidsteer)   Two independent grapples  1/4" material, 3/8" end plates  3/4 X 6 bevelled cutting edge  Ideal for awkward abrasive loads  31" overall ...

Compact Scrap Grapple Bucket (Skidsteer)   3/16" material, 1/4" end plates  3/4 X 4 bevelled cutting edge  Single grapple arm  26" overall height  26" overall depth&...

Compact Brush Grapple   Opens to 38" wide from ground to point of grapple  Tine tips and grapple tips are AR400 material  Tine spacing 6" on center  Single grapple arm  28&quo...

Brush Grapple   Opens to 48" wide from ground to point of grapple  Tine tips and grapple tips are AR400 material  Tine spacing 5-1/2" between  Independent grapples for clamping of ...

Light Duty Root Rake c/w Hydraulic Grapple   Light weight with rugged design for compact loaders  28" overall height when closed  7-3/8" centre to centre tine spacing  Points are 1...

Light Duty Root Rake c/w Electric Grapple   Light weight with rugged design for compact loaders  28" overall height when closed  7 3/8" centre to centre tine spacing  Points are &f...

Root Rake c/w Grapple   Two independent grapples for complete clamping on awkward loads  34" overall height when closed  Points are 1/2" thick, 400 Brinell high tensile steel  7-3/...

Hydraulic Bale Claw   Ideal for handling stacked large square bales  12 hydraulic claws rotate into stack for secure handling  72" overall height  Frame width 64"  6000 lbs ca...

Hydraulic Rotary Broom   Unique lateral and forward float  Gauge wheels  Includes electric selector valve and wire kit (if you do not choose OEM control kit)  Includes hydraulic hoses and fl...

Hydraulic Rotary Pick-up Broom   Ideal for cleaning up parking lots, construction sites, streets, curbs and gutters as well as parks and recreation areas etc.  Includes hydraulic hoses and flat-faced ...

Heavy Duty Rubber Free Stall Scraper with Back Drag   Heavy duty rubber for longer life  Deeper scraper for more volume and smoother operation  Enclosed frame with splash plate  Allows clean...

Heavy Duty Rubber Free Stall Scraper   Heavy duty rubber for longer life  Deeper scraper for more volume and smoother operation  Enclosed frame with splash plate  18" high rubber  ...

Rubber Feed Alley Scraper   Power angle  Easy on concrete or tiled floor mangers  24" high  Angles 45° either direction           ...

Hydraulic Adjustable Rubber Scraper   Heavy duty rubber for longer life  Hydraulic flow divider for equal movement of wings  24" tall rubber           ...

Silage Facer - Bucket Mount   Minimum 20 GPM required  Maximum flow 40 GPM  Facing drum mounted on bucket  400 Brinell high tensile steel teeth on drum  Dual drive motors  Heavy du...

Silage Facer - Frame Mount   Minimum 20 GPM required  Maximum flow 40 GPM  Facing drum mounted on a 4 ft frame  400 Brinell high tensile steel teeth on drum  Includes hose kit and flat-...

Silage Grapple Bucket   Heavy duty grapple integrated into the bucket design  Strategic pivoting arc design on the grapple for more power and less disturbance of the bunk silo face  3 X 16 cylind...

5000 Series Silage Blade - Front Wheel Assist Tractors   For front wheel assist tractors only  Compatible with SB5QDM Series undercarriage blade mounts.  Heavy duty construction with two angle cy...

Bale Knife - Loader Mount   Slice bales up to 72" in diameter  Proprietary grabber holds and retains plastic and net wrap, eliminates “tail” dropping into mixer  Cuts down TMR pr...

6000 Series Silage Blade    Designed for articulated tractors only  Quick attach design  Heavy duty construction  Dual hydraulic angle cylinders  Dual manual jacks ensures easy hook up ...

Single Three Point Hitch Spear   Reese receiver / ball hitch (Ball hitch not included)  Fits both CAT I & II  Kverneland tine  2 stabilizer tines  2000 lbs capacity @ 24" L.C.&...

Double Three Point Hitch Spear   Reese receiver / ball hitch (Ball hitch not included)  Fits both CAT I & II  Kverneland tine  Available with 39" or 49" tine  Approximate ...

Single Prong Bucket Spear   Kverneland tine  2000 lbs capacity @ 24" L.C.  Adaptable to most buckets  No tools or bolts needed  Comes with chain & tightener  Approximate w...

Double Prong Bucket Spear   Kverneland tines @ 30" spacing  Same as single bucket spear but with extra tine to handle large square bales  Approximate weight: 112 lbs  2000 lbs capacity ...

Single Prong Bale Spear   Kverneland tine  Easy stabbing & removal  2000 lbs capacity @ 24" L.C.  Available with 39" or 49" tine  Two stabilizer tines  Approxima...

Double Prong Bale Spear   Kverneland tines @ 30" spacing  Works well for either round bales or large square bales  Not to be used for carrying 2 bales stacked on top of each other  Avai...

Double Prong Bale Spear c/w Guard   Kverneland tines @ 30" spacing  Works well for either round bales or large square bales  Comes with bolt-on guard  Added protection for handling larg...

Three Prong Bale Spear   Kverneland tines @ 23" spacing  Made to handle large 4' x 4' x 8' square bales  Not to be used for carrying 2 bales stacked on top of each other  Av...