HLA Attachments

Heavy Duty Rubber Free Stall Scraper with Back Drag   Heavy duty rubber for longer life  Deeper scraper for more volume and smoother operation  Enclosed frame with splash plate  Allows clean...

6000 Series Silage Blade    Designed for articulated tractors only  Quick attach design  Heavy duty construction  Dual hydraulic angle cylinders  Dual manual jacks ensures easy hook up ...

Bale Knife - Loader Mount   Slice bales up to 72" in diameter  Proprietary grabber holds and retains plastic and net wrap, eliminates “tail” dropping into mixer  Cuts down TMR pr...

5000 Series Silage Blade - Front Wheel Assist Tractors   For front wheel assist tractors only  Compatible with SB5QDM Series undercarriage blade mounts.  Heavy duty construction with two angle cy...

Silage Grapple Bucket   Heavy duty grapple integrated into the bucket design  Strategic pivoting arc design on the grapple for more power and less disturbance of the bunk silo face  3 X 16 cylind...

Silage Facer - Frame Mount   Minimum 20 GPM required  Maximum flow 40 GPM  Facing drum mounted on a 4 ft frame  400 Brinell high tensile steel teeth on drum  Includes hose kit and flat-...

Silage Facer - Bucket Mount   Minimum 20 GPM required  Maximum flow 40 GPM  Facing drum mounted on bucket  400 Brinell high tensile steel teeth on drum  Dual drive motors  Heavy du...

Hydraulic Adjustable Rubber Scraper   Heavy duty rubber for longer life  Hydraulic flow divider for equal movement of wings  24" tall rubber           ...

Rubber Feed Alley Scraper   Power angle  Easy on concrete or tiled floor mangers  24" high  Angles 45° either direction           ...

Heavy Duty Rubber Free Stall Scraper   Heavy duty rubber for longer life  Deeper scraper for more volume and smoother operation  Enclosed frame with splash plate  18" high rubber  ...

Single Three Point Hitch Spear   Reese receiver / ball hitch (Ball hitch not included)  Fits both CAT I & II  Kverneland tine  2 stabilizer tines  2000 lbs capacity @ 24" L.C.&...

Hydraulic Rotary Pick-up Broom   Ideal for cleaning up parking lots, construction sites, streets, curbs and gutters as well as parks and recreation areas etc.  Includes hydraulic hoses and flat-faced ...

Hydraulic Rotary Broom   Unique lateral and forward float  Gauge wheels  Includes electric selector valve and wire kit (if you do not choose OEM control kit)  Includes hydraulic hoses and fl...

Hydraulic Bale Claw   Ideal for handling stacked large square bales  12 hydraulic claws rotate into stack for secure handling  72" overall height  Frame width 64"  6000 lbs ca...

Root Rake c/w Grapple   Two independent grapples for complete clamping on awkward loads  34" overall height when closed  Points are 1/2" thick, 400 Brinell high tensile steel  7-3/...

Light Duty Root Rake c/w Electric Grapple   Light weight with rugged design for compact loaders  28" overall height when closed  7 3/8" centre to centre tine spacing  Points are &f...

Light Duty Root Rake c/w Hydraulic Grapple   Light weight with rugged design for compact loaders  28" overall height when closed  7-3/8" centre to centre tine spacing  Points are 1...

Brush Grapple   Opens to 48" wide from ground to point of grapple  Tine tips and grapple tips are AR400 material  Tine spacing 5-1/2" between  Independent grapples for clamping of ...

Compact Brush Grapple   Opens to 38" wide from ground to point of grapple  Tine tips and grapple tips are AR400 material  Tine spacing 6" on center  Single grapple arm  28&quo...

Compact Scrap Grapple Bucket (Skidsteer)   3/16" material, 1/4" end plates  3/4 X 4 bevelled cutting edge  Single grapple arm  26" overall height  26" overall depth&...

Three Prong Bale Spear c/w Adjustable Guard   50" high frame with adjustable guard posts for safe handling of large square bales up to 3 high  Safety foot for roll over protection while in storag...

Hydraulic Limb Saw  13-1/2 ft main boom with hydraulically controlled 6-1/2 ft telescopic boom  3000 lbs capacity closed / 1500 lbs capacity extended  Pintle end hook with spring-loaded locking arm &am...

Hydraulic Limb Saw  Cut tree limbs from the safety of your skidsteer or tractor  Automatic chain oiler  Standard Stihl 24" guide bar and cutting chain for easy replacement  12 ft reach  ...

3 Point Hitch Weight Box  Comes with cross bar for quick-hitch system  Bolt-on top lid for ease of filling  5 cu. ft. CAT 1 or 2  8.38 cu. ft. CAT 2           ...

Tooth Bar Bolt-on  Designed to fit HLA bucket with tapered end plates  Easy to remove replaceable teeth           ...

Boom Pole Telescopic (Standard Activated)  6 ft main boom with a 4 ft telescopic boom  3000 lbs capacity closed / 1500 lbs capacity extended  Five position telescopic boom  Pintle end hook with sp...

Five Prong Bale Spear w/ Rigid Frame   Ideal for handling stacked large square bales  74" overall height  Safety foot for roll over protection while in storage position  Frame width 72&...

Four Prong Bale Spear w/ Rigid Frame   Ideal for handling stacked large square bales  80" overall height  Safety foot for roll over protection while in storage position  Frame width 72&...

Four Prong Bale Spear For Round Bales   Designed specifically for carrying 2 round bales  Can carry 2 round bales up to 6' diameter  Frame width 100"  Approximate weight 340 lbs&nbs...

Four Prong Bale Spear c/w Adjustable Guard   Designed specifically for carrying large 4' x 4' x 8' square bales, 2 high  Safety foot for roll over protection while in storage position ...

Scrap Grapple Bucket (Skidsteer)   Two independent grapples  1/4" material, 3/8" end plates  3/4 X 6 bevelled cutting edge  Ideal for awkward abrasive loads  31" overall ...

Three Prong Bale Spear c/w Guard   Kverneland tines @ 23" spacing  Made to handle large 4' x 4' x 8' square bales  Available with 32", 39" or 49" tines  Frame...

Three Prong Bale Spear   Kverneland tines @ 23" spacing  Made to handle large 4' x 4' x 8' square bales  Not to be used for carrying 2 bales stacked on top of each other  Av...

Double Prong Bale Spear c/w Guard   Kverneland tines @ 30" spacing  Works well for either round bales or large square bales  Comes with bolt-on guard  Added protection for handling larg...

Double Prong Bale Spear   Kverneland tines @ 30" spacing  Works well for either round bales or large square bales  Not to be used for carrying 2 bales stacked on top of each other  Avai...

Single Prong Bale Spear   Kverneland tine  Easy stabbing & removal  2000 lbs capacity @ 24" L.C.  Available with 39" or 49" tine  Two stabilizer tines  Approxima...

Double Prong Bucket Spear   Kverneland tines @ 30" spacing  Same as single bucket spear but with extra tine to handle large square bales  Approximate weight: 112 lbs  2000 lbs capacity ...

Single Prong Bucket Spear   Kverneland tine  2000 lbs capacity @ 24" L.C.  Adaptable to most buckets  No tools or bolts needed  Comes with chain & tightener  Approximate w...

Double Three Point Hitch Spear   Reese receiver / ball hitch (Ball hitch not included)  Fits both CAT I & II  Kverneland tine  Available with 39" or 49" tine  Approximate ...

        Side Discharge Straw/Lime Bucket   Minimum 12 GPM required  Hydraulic drive (coupled direct)  Agitator prevents material bridging  Secondary metering drum regulat...

     Stone Fork (Retainer Style Tine) - HEAVY DUTY   HEAVY DUTY  1-¾" shaft diameter  2-¾" spacing between tines  Points are ¾" thick, 400 ...

       Stone Fork (Landscape with Power Rake)   ¾" shaft diameter  1-¾" spacing between tines  Points are ½" thick, 400 Brinell high streng...

      Stone Fork (Cranked Kverneland Tine)   39" Conus II cranked Kverneland tines (32" useable length)  Tines installed on 4" centres  Ruggedly built  Heavy du...

        Side Shift Pallet Fork   Hydraulic carriage side shift  16" travel (8" right or left)  Adjustable tines           ...

         Rotating Pallet Fork   Rotation is powered by a cylinder for smooth and contoured operation  Adjustable tines  Rotates 180° for a full dump to the left ...

         Regular Duty Stone Fork & Regular Utility Grapple   Same great features as regular & heavy duty stone forks  Opens up to 70"  Comes with 2-½&...

        Optional Thumb for Big Arm Backhoe   Bolts on to Big Arm Backhoe  Three working positions  Manual positioning  Pins up against backhoe arm when not in use  &...

         Big Arm Backhoe for Skidsteer   QTach to most skidsteer loaders  6 ft digging depth  Hydraulic swing cylinder with 140° swing  Single electric selector ...

       Skidsteer Grader   Push-pull design for grading in forward or reverse  Pneumatic swivel wheels on oscillating front axle  Extendable front axle bolster for better stabi...

   Stone Fork (Retainer Style Tine) COMPACT DUTY   1" Shaft diameter  2-½" spacing between tines  Points are ⅝" thick, 400 Brinell high strength steel  23&q...

      Standard (Front End Loader) Bucket & Regular Utility Grapple   Standard (Front End Loader) Bucket & Regular Utility Grapple  Opens up to 70"  Comes with 2-&frac1...

       Standard (Skidsteer) Bucket & Regular Utility Grapple   Standard (Skidsteer) Bucket & Regular Utility Grapple  Opens up to 70"  Comes with 2-½"...

        High Volume Skidsteer Snow Bucket   3/16" material, ¼" end plates  ¾ X 4 bevelled cutting edge  Reinforced top lip  39" deep, 31"...

        Produce Skidsteer Bucket   No sharp edges for gentle handling of produce  Screened back for better visibility  31" deep, 31" high  Made of the same...

        Low Profile Skidsteer Bucket c/w Digging Teeth - Heavy Duty   Heavy duty  ¼" material, ¼" end plates  ¾ X 6 bevelled cutting edge&n...

        Low Profile Skidsteer Bucket c/w Digging Teeth - REGULAR DUTY   Regular duty  3/16" material, ¼" end plates  ¾ X 4 bevelled cutting edge  ...

         High Volume Front End Loader Bucket - HEAVY DUTY   Heavy duty  ¼" material, ¼" end plates  ¾ X 6 bevelled cutting edge  Reinf...

        High Volume Front End Loader Bucket - REGULAR DUTY   Regular duty  3/16" material, ¼" end plates  ¾ X 4 bevelled cutting edge  Reinforced ...

       Telescopic Handler Bucket - HIGH VOLUME   ¼" material, ¼" end plates  3/4 X 6 bevelled cutting edge  Reinforced top lip  47" deep, 41&...

Regular Utility Grapple   Can be fitted to models SB, SBHV, MB, MBHV, MFE, & SFR  Accommodates 4ft round bales  Works equally well on other materials such as manure, etc.  Opens up to 70...